Basic Requirements For Dial-In; How To Configure Dial-In - NETGEAR FWG114P Reference Manual

Reference Manual for the ProSafe Wireless 802.11g Firewall/Print Server Model FWG114P

Basic Requirements for Dial-in

Dial-in requires these elements:
A broadband connection to the FWG114P.
1.
An analog phone line.
2.
A serial modem properly configured and attached to the DB9 connector on the serial port.
3.
The Dial-in settings configured and applied to the FWG114P.
4.

How to Configure Dial-in

Follow the steps below to configure a serial port dial-in connection.
Configure a serial port modem according to the instructions above.
1.
From the Serial Port section of the main menu, click Dial-in.
2.
Figure 5-3: Serial Port Dial-in settings screen
Configure the Dial-in settings.
3.
Click Apply for the changes to take effect.
4.
Serial Port Configuration
March 2004, 202-10027-01M-10207-01, Reference Manual v2
5-5