Default Factory Settings - NETGEAR FWG114P Reference Manual
Prosafe wireless 802.11g
firewall/print server
Hide thumbs
Also See for FWG114P:
- Reference manual (198 pages) ,
- Brochure (2 pages) ,
- Specifications (2 pages)
Table of Contents
Advertisement
Reference Manual for the ProSafe Wireless 802.11g Firewall/Print Server Model FWG114P
Default Factory Settings
The FWG114P default factory settings shown below. You can restore these defaults with the
Factory Default Restore button on the rear panel as seen in the illustration
on page
2-8. After you install the FWG114P Wireless Firewall/Print Server, use the procedures
below to customize any of the settings to better meet your networking needs.
SSID broadcast
Wireless Card Access List for
Access Point Connections
WEP Security
Authentication Type
Wireless Configuration
FEATURE
DEFAULT FACTORY SETTINGS
SSID
NETGEAR
RF Channel
11 until the region is selected
Access Point
Enabled
Enabled
All wireless stations allowed
Disabled
Open System
March 2004, 202-10027-01
"FWG114P Rear Panel"
4-7
Advertisement
Table of Contents
