Configuring A Serial Port Modem; Basic Requirements For Serial Port Modem Configuration; How To Configure A Serial Port Modem - NETGEAR FWG114P Reference Manual

Reference Manual for the ProSafe Wireless 802.11g Firewall/Print Server Model FWG114P

Configuring a Serial Port Modem

You can configure a serial port modem for any of the features described above.
Be sure you have prepared the basic requirements listed below, then follow the 'how to' procedure.

Basic Requirements for Serial Port Modem Configuration

Configuring a serial port modem requires these elements:
A serial analog or ISDN modem.
1.
A serial modem cable with a DB9 connector.
2.
An active phone or ISDN line.
3.

How to Configure a Serial Port Modem

Follow the steps below to configure a serial port modem.
From the main menu, click Modem in the Serial Port section.
1.
Figure 5-1: Serial Port Modem configuration menu
Select the Serial Line Speed.
2.
This is the maximum speed the modem will attempt to use. For ISDN permanent connections,
the speeds are typically 64000 or 128000 bps. For dial-up modems, 56000 bps would be a
typical setting.
Select the Modem Type:
3.
— For ISDN, select "Permanent connection (leased line)."
5-2
March 2004, 202-10027-01M-10207-01, Reference Manual v2
Serial Port Configuration