Troubleshooting - Ryobi RY42144 Operator's Manual

GENERAL MAINTENANCE
Avoid using solvents when cleaning plastic parts. Most
plastics are susceptible to damage from various types of
commercial solvents and may be damaged by their use. Use
clean cloths to remove dirt, dust, oil, grease, etc.
WARNING:
Do not at any time let brake fluids, gasoline, petroleum-
based products, penetrating oils, etc., come in contact
with plastic parts. Chemicals can damage, weaken or
destroy plastic, which could result in serious personal
injury.
PROBLEM
Motor fails to start when switch is
turned on.
MAINTENANCE

TROUBLESHOOTING

POSSIBLE CAUSE
Power cord is not plugged in or con-
nection is loose.
Household circuit breaker is tripped.
Inlet cover door or vacuum tube is
not properly secured.
Blower tube or vacuum bag is not
correctly installed.
For any questions about operating or maintaining your product,
Your product has been fully tested prior to shipment to ensure
Page 11 – English
STORAGE (1 MONTH OR LONGER)
 Unplug the power cord from the power source when
storing the unit.
 Clean all foreign material from the blower.
 Store indoors in a place that is inaccessible to children.
Keep away from corrosive agents such as garden
chemicals and de-icing salts.
Plug in the power cord.
Check circuit breaker.
Fully tighten the wing knob.
Reinstall the blower tube or vacuum
bag.
CALL US FIRST
call the Ryobi Help Line!
your complete satisfaction.
SOLUTION