Features; Assembly - Ryobi RY42144 Operator's Manual

PRODUCT SPECIFICATIONS
Input ...........................................................................................................................nominal 120V/60Hz AC only, 12 Amps
Air Velocity:
MPH .................................................................................................................................................230 – High, 150 – Low
CFM .................................................................................................................................................350 – High, 250 – Low
KNOW YOUR BLOWER/VAC
See Figure 1.
The safe use of this product requires an understanding of
the information on the tool and in this operator's manual as
well as a knowledge of the project you are attempting. Before
use of this product, familiarize yourself with all operating
features and safety rules.
CORD RETAINER
A convenient cord retainer helps keep the extension cord
connection secure during blower operation.
UNPACKING
This product requires assembly.
 Carefully remove the product and any accessories from
the box. Make sure that all items listed in the packing list
are included.
WARNING:
Do not use this product if any parts on the Packing List
are already assembled to your product when you unpack
it. Parts on this list are not assembled to the product by
the manufacturer and require customer installation. Use
of a product that may have been improperly assembled
could result in serious personal injury.
 Inspect the product carefully to make sure no breakage
or damage occurred during shipping.
 Do not discard the packing material until you have
carefully inspected and satisfactorily operated the
product.
 If any parts are damaged or missing, please call
1-800-860-4050 for assistance.

FEATURES

HIGH VELOCITY NOZZLE
The high velocity nozzle is great for wet sticky leaves. It
allows you to scrape wet leaves or debris while operating
the blower.
TOOLLESS ATTACHMENTS
The blower tube with high velocity nozzle, vacuum bag, and
vacuum tubes can be easily installed on the product without
any additional tools.
TWO-SPEED
The blower/vac is designed for low (I) or high (II) speeds.

ASSEMBLY

PACKING LIST
Blower/Vac
Inlet Cover Door
Blower Tube with High Velocity Nozzle
Upper and Lower Vacuum Tubes
Vacuum Bag
Operator's Manual
If any parts are damaged or missing do not operate this
product until the parts are replaced. Use of this product
with damaged or missing parts could result in serious
personal injury.
Do not attempt to modify this product or create acces-
sories not recommended for use with this product. Any
such alteration or modification is misuse and could result
in a hazardous condition leading to possible serious
personal injury.
Page 7 – English
WARNING:
WARNING: