Special Features - Sunbeam GCSBNC-100 Instruction Manual

Corded/cordless iron
Table of Contents

Advertisement

Available languages

Available languages

CORDLESS IRONING
1. Make sure the cord is plugged into a 120-Volt AC outlet.
2. UNLOCK THE IRON FROM THE BASE by moving the Lock/Unlock switch on
the Heating Base to the unlocked position
3. WAIT until the Indicator Light turns solid green; the iron is ready for use. Hold
iron by the handle and remove from the base (Figure 3).
4. START IRONING.
5. PLACE the iron back on the Heating Base every time you stop ironing.
• The red Indicator Light comes on, to indicate the iron is reheating.
• When the Indicator Light turns solid green., the iron is ready for use.
IMPORTANT: When using the SHOT OF STEAM
down faster; therefore, it might take up to an additional time to reheat.
6. RESTART IRONING until the red Indicator Light tuns solid green again.
NOTE: The Cordless iron is NOT a rechargeable device. You cannot continuously
use this iron without placing it on the heating base.
Figure 3
.
feature, your iron might cool
®
-E8-

SPECIAL FEATURES

ANTI-DRIP SYSTEM
Eliminates leaks and water spots.
SPRAY MIST
FEATURE
®
A powerful water spray mist that dampens the fabric to aid in removing wrinkles
from heavy fabrics and for setting creases.
TO USE: Press the SPRAY MIST
®
Button firmly.
SHOT OF STEAM
FEATURE
®
Provides an extra burst of steam for deep penetration of stubborn wrinkles. You
can use this feature while Dry or Steam ironing, as long as the Fabric Select Dial is
set to high temperature. The water reservoir must be at least ¼ full of water.
TO USE: Place the iron on top of the wrinkle and press the SHOT OF STEAM
button each time you would like an extra burst of steam. The SHOT OF STEAM
feature may be used continuously in approximately 3-second intervals.
SHOT OF STEAM
FEATURE
®
Allows iron to function vertically as a garment steamer.
TIP: When using vertical steam, hang clothing on a hanger for best results.
Hanging curtains and drapes may also be steamed.
TO USE:
1. Ensure that the iron is heated up.
2. Hold iron vertically near, but not touching the fabric you want to steam. Pull
the fabric tight.
3. Press SHOT OF STEAM
button in 3-second intervals as you move iron over
®
wrinkles.
WARNING: To prevent burns, keep hands away from the area being steamed.
WARNING: DO NOT steam garments while wearing them; this may result in
injuries.
®
-E9-
®

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Gcsbnc-101

Table of Contents