Connect To Your Router Or Network - ZyXEL Communications MAX-206m2 User Manual

Connect to your router or network

Once you have set up your XOHM Modem and confirmed your web connection, you
can set up your router or network as needed.
1.
Consult your router's documentation for setup details.
2.
Disconnect the Ethernet cable from your computer and connect it to the router's
Internet port. (It will go directly from the XOHM Modem's LAN 1 port to the router.)
Note Be sure to keep a minimum distance of 1 foot between the XOHM Modem and your Wi-Fi
router to avoid signal interference.
3. Connect an Ethernet cable from the router to your computer.
4.
Make sure the modem's
launching the web browser. If you are having difficulties, double-check your
router's settings.
Tip For added security, you may wish to change your modem password after setting up your
router. See "Access the advanced settings menu" on page 14 for more information.
10 Install Your XOHM Modem
LAN 1 indicator is illuminated and test connectivity by