OMNI ADSL LAN Factory Defaults
LAN IP Address
192.168.1.1
Subnet Mask
255.255.255.0
Internet Account Information
Your ISP (Internet Service Provider) or telephone company should give you most of the following information or
pre-configured the OMNI ADSL LAN with it when you signed up for your Internet access account. You do not
need to know every field.
REQUIRED INFORMATION
Virtual Path Identifier (VPI):
Virtual Channel Identifier (VCI):
Multiplexing (VC-based or LLC-based):
Your device's WAN IP Address (if given):
Encapsulation:
❑
RFC 1483
❑
ENET ENCAP
❑
PPPoA
❑
PPPoE
Preparing Your Network
All computers must have a 10M or 100M network card and TCP/IP installed. TCP/IP should already be installed
on computers using Windows NT/2000/XP, Macintosh OS 7 and later operating systems. See your User's Guide
for information on configuring static IP address for your computer.
These procedures are for dynamic IP address assignment.
Setting up Your Windows 95/98/Me Computer
Installing TCP/IP Components
1. Click Start, Settings, Control Panel and double-click the Network icon.
2. The Network window Configuration tab displays a list of installed components.
To install TCP/IP:
a. In the Network window, click Add.
b. Select Protocol and then click Add.
c. Select Microsoft from the list of manufacturers.
d. Select TCP/IP from the list of network protocols and then click OK.
Default Password
DHCP IP Pool
❑
VC
Ethernet Encapsulation Gateway IP Address:
User Name:
(PPPoE) Service Name:
User Name:
6
1234
192.168.1.33 – 192.168.1.64
❑
LLC
Password:
Password: