Networking Basics; Check Your Ip Address - D-Link DAP-2310 User Manual

Appendix B - Networking Basics

Networking Basics

Check your IP address

After you install your network adapter, by default, the TCP/IP settings should be set to obtain an IP address from a
&*%2 UGTXGT KG YKTGNGUU TQWVGT CWVQOCVKECNN[ 6Q XGTKH[ [QWT +2 CFFTGUU RNGCUG HQNNQY VJG UVGRU DGNQY
Click on Start > Run. In the run box type cmd and click OK.
At the prompt, type EL?KJ C and press Enter.
This will display the IP address, subnet mask, and
the default gateway of your adapter.
If the address is 0.0.0.0, check your adapter
installation, security settings, and the settings on
[QWT TQWVGT 5QOG TGYCNN UQHVYCTG RTQITCOU OC[
block a DHCP request on newly installed adapters.
If you are connecting to a wireless network at a
JQVURQV GI JQVGN EQHHGG UJQR CKTRQTV  RNGCUG
contact an employee or administrator to verify their
wireless network settings.
D-Link DAP-2310 User Manual 71