Multi-Ssid - D-Link DAP-2310 User Manual

5GEVKQP   %QP IWTCVKQP
6JG FGXKEG UWRRQTVU WR VQ HQWT OWNVKRNG 5GTXKEG 5GV +FGPVK GTU +P VJG Basic > Wireless section, you can set the Primary
SSID. The SSID's factory default setting is dlink. The SSID can be easily changed to connect to an existing wireless
network or to establish a new wireless network.
Enable Check to enable support for multiple SSIDs.

Multi-SSID:

Band: This read-only value is the current band
setting.
Index:
;QW ECP UGNGEV WR VQ VJTGG OWNVK55+&U 9KVJ
the Primary SSID, you have a total of four
multi-SSIDs.
SSID: 5GTXKEG 5GV +FGPVK GT 55+& KU VJG PCOG
FGUKIPCVGF HQT C URGEK E YKTGNGUU NQECN CTGC
PGVYQTM 9.#0  6JG 55+& U HCEVQT[ FGHCWNV
setting is dlink.
changed to connect to an existing wireless
network or to establish a new wireless
network.
SSID Visibility: Enable or Disable SSID visibility. Enabling
this feature broadcasts the SSID across the
network, thus making it visible to all network
users.
Security:
The Multi-SSID security can be Open System, WPA-Personal, WPA-Enterprise, or 802.1x. For a detailed description
of the Open System parameters, please go to page 25. For a detailed description of the WPA-Personal parameters,
please go to page 26. For a detailed description of the WPA-Enterprise parameters, please go to page 27. For a detailed
description of the O802.1x parameters, please go to page 28.
D-Link DAP-2310 User Manual
Multi-SSID
The SSID can be easily
30