D-Link DAP-2310 User Manual page 29

5GEVKQP   %QP IWTCVKQP
Beacon Interval
$GCEQPU CTG RCEMGVU UGPV D[ CP CEEGUU RQKPV VQ U[PEJTQPK\G C YKTGNGUU PGVYQTM 5RGEKH[ C XCNWG KP OKNNKUGEQPFU 6JG
(25-500):
FGHCWNV 100) is recommended. Setting a higher beacon interval can help to save the power of wireless clients, while
setting a lower one can help a wireless client connect to an access point faster.
DTM Interval 5GNGEV C &GNKXGT[ 6TCH E +PFKECVKQP /GUUCIG UGVVKPI DGVYGGP 1 and 15. The default value is 1. DTIM is a countdown in-
(1-15): forming clients of the next window for listening to broadcast and multicast messages.
Transmit Power: This setting determines the power level of the wireless transmission. Transmitting power can be adjusted to eliminate
overlapping of wireless area coverage between two access points where interference is a major concern. For example,
if wireless coverage is intended for half of the area, then select 50% as the option. Use the drop-down menu to select
100%, 50%, 25%, or 12.5%.
WMM (Wi-Fi WMM stands for Wi-Fi Multimedia. Enabling this feature will improve the user experience for audio and video applica-
tions over a Wi-Fi network.
Multimedia):
Ack Time Out 6Q GHHGEVKXGN[ QRVKOK\G VJTQWIJRWV QXGT NQPI FKUVCPEG NKPMU GPVGT C XCNWG HQT #EMPQYNGFIGOGPV 6KOG 1WV HTQO 64 to 200
(2.4 GHZ, 64~200) : OKETQUGEQPFU KP VJG  )*\ KP VJG GNF RTQXKFGF
Select Enable or Disable. Enabling a short guard interval can increase throughput. However, be aware that it can also
Short GI:
increase the error rate in some installations due to increased sensitivity to radio-frequency installations.
Select Enable or Disable +PVGTPGV )TQWR /CPCIGOGPV 2TQVQEQN CNNQYU VJG #2 VQ TGEQIPK\G +)/2 SWGTKGU CPF TGRQTVU
IGMP Snooping:
UGPV DGVYGGP TQWVGTU CPF CP +)/2 JQUV YKTGNGUU 56#  9JGP +)/2 UPQQRKPI KU GPCDNGF VJG #2 YKNN HQTYCTF OWNVKECUV
RCEMGVU VQ CP +)/2 JQUV DCUGF QP +)/2 OGUUCIGU RCUUKPI VJTQWIJ VJG #2
Select Enable or Disable. This is an option for load balancing. This determines whether to limit the number of users
Connection Limit:
CEEGUUKPI VJKU FGXKEG 6JG GZCEV PWODGT KU GPVGTGF KP VJG 7UGT .KOKV GNF DGNQY 6JKU HGCVWTG CNNQYU VJG WUGT VQ UJCTG
VJG YKTGNGUU PGVYQTM VTCH E CPF VJG ENKGPV WUKPI OWNVKRNG #2U +H VJKU HWPEVKQP KU GPCDNGF YJGP VJG PWODGT QH WUGTU
exceeds this value, the DAP-2310 will not allow clients to associate with the AP.
User Limit (0-64): 5GV VJG OCZKOWO COQWPV QH WUGTU VJCV CTG CNNQYGF CEEGUU 0-64 users). To use this feature, the Connection Limit
above must be enabled. For most users, a limit of 10 is recommended. The default setting is 20.
5GNGEV VJG OWNVKECUV TCVG HQT ) DCPF
Multicast Rate for
13,12, 9, 6.5,6, 11, 5.5, 2 or 1.
2.4G Band
D-Link DAP-2310 User Manual
The choices available are 130,117,78,65,58.5,54, 52,48, 39,36, 26,24, 19.5,18,
29