D-Link DAP-2310 User Manual page 31

5GEVKQP   %QP IWTCVKQP
Check the Enable Priority box at the top of this window to enable. Select the priority from the drop-down menu.
Priority:
Select Enable or Disable.
WMM (Wi-Fi
Multimedia):
When you select Open System, toggle between Enable and Disable. If Enable KU UGNGEVGF VJG -G[ 6[RG -G[ 5K\G -G[
Encryption:
+PFGZ `  -G[ CPF %QP TO -G[U OWUV CNUQ DG EQP IWTGF
Key Type: Select HEX or ASCII.
Select 64 Bits or 128 Bits.
Key Size:
Key Index (1-4): Select from the 1st to 4th key to be set as the active key.
Input up to four keys HQT GPET[RVKQP ;QW YKNN UGNGEV QPG QH VJGUG MG[U KP VJG -G[ +PFGZ FTQRFQYP OGPW
Key:
When you select either WPA-Personal or WPA-Enterprise [QW OWUV CNUQ EJQQUG C 92# OQFG HTQO VJG FTQRFQYP OGPW
WPA Mode:
AUTO (WPA or WPA2), WPA2 Only, or WPA Only. WPA and WPA2 use different algorithms. AUTO (WPA or WPA2)
CNNQYU [QW VQ WUG DQVJ 92# CPF 92# +P CFFKVKQP [QW OWUV EQP IWTG %KRJGT 6[RG CPF )TQWR -G[ 7RFCVG +PVGTXCN
Select Auto, AES, or TKIP from the drop-down menu.
Cipher Type:
Group Key Update
Select the interval during which the group key will be valid. The default value of 1800 seconds is recommended.
Interval:
PassPhrase:
When you select WPA-Personal, please enter a PassPhrase KP VJG EQTTGURQPFKPI GNF
Confirm
When you select WPA-Personal, please re-enter the PassPhrase entered in the previous item KP VJG EQTTGURQPFKPI GNF
PassPhrase:
RADIUS Server: When you select WPA-Enterprise GPVGT VJG +2 CFFTGUU QH VJG 4#&+75 UGTXGT +P CFFKVKQP [QW OWUV EQP IWTG 4#&+75
Port and RADIUS Secret.
RADIUS Port: Enter the RADIUS port.
RADIUS Secret: Enter the RADIUS secret.
D-Link DAP-2310 User Manual 31