Lan - D-Link DAP-2310 User Manual

5GEVKQP   %QP IWTCVKQP
LAN is short for Local Area Network. This is considered your internal network. These are the IP settings of the LAN
KPVGTHCEG HQT VJG &#2 6JGUG UGVVKPIU OC[ DG TGHGTTGF VQ CU RTKXCVG UGVVKPIU ;QW OC[ EJCPIG VJG .#0 +2 CFFTGUU
if needed. The LAN IP address is private to your internal network and cannot be seen on the Internet.
Get IP Static IP (Manual) is chosen here. Choose this
From: option if you do not have a DHCP server in your
network, or if you wish to assign a static IP address
to the DAP-2310. When Dynamic IP (DHCP) is
UGNGEVGF VJG QVJGT GNFU JGTG YKNN DG ITC[GF QWV
Please allow about two minutes for the DHCP client
to be functional once this selection is made.
IP
The default IP address is 192.168.0.50. Assign a
Address:
static IP address that is within the IP address range
of your network.
Subnet Enter the subnet mask. All devices in the network
Mask: must share the same subnet mask.
Default
Enter the IP address of the gateway in your network.
Gateway:
If there is a gateway in your network, please enter
an IP address within the range of your network.
D-Link DAP-2310 User Manual

LAN

27