Huawei EchoLife HG620 User Manual page 24

Indicator Status
WLAN Blinking
Solid on
Off
WPS Blinking
Solid on
Off
LAN1–LAN4 Blinking
Solid on
Off
USB Blinking
Solid on
Off
Description
The wireless network function is enabled.
Data is being transmitted through the WLAN.
The wireless network function is enabled.
No data is being transmitted through the WLAN.
The wireless network function is disabled.
This indicator has three blinking modes that indicate
three states.
The indicator periodically blinks and is on for 0.2s
and off for 0.1s, which indicates that the WPS
function is activated and that a wireless terminal
can connect to the HG620.
The indicator periodically blinks and is on for 0.1s
and off for 0.1s, which indicates that a wireless
terminal fails to connect to the HG620.
The indicator is on for 0.1s and then off for 0.1s. After
this process repeats for four times, the indicator is off
for 0.5s. Then, the indicator blinks as the preceding
process, which indicates a wireless terminal is setting
up a connection to the HG620.
A wireless terminal is connected to the HG620
through the WPS protocol. This state lasts 300s.
The HG620 does not perform the WPS negotiating
operation, or the WPS functional module is faulty.
Data is being transmitted through the Ethernet
interface.
The Ethernet connection is set up.
The Ethernet connection is not set up.
Data is being transmitted through the USB interface.
The USB connection is set up.
The USB connection is not set up.
19