Huawei HG655d Quick Start Manual

Home gateway
Hide thumbs Also See for HG655d:

Advertisement

Quick Links

HUAWEI HG655d
Home Gateway Quick Start
1 Contents in the Package
HG655d
Splitter
Power Adapter
DSL Cable
Ethernet Cable
User CD-ROM
Safety Information
Warranty Card
1

Advertisement

Table of Contents
loading

Summary of Contents for Huawei HG655d

  • Page 1 HUAWEI HG655d Home Gateway Quick Start 1 Contents in the Package HG655d Splitter Power Adapter DSL Cable Ethernet Cable User CD-ROM Safety Information Warranty Card...
  • Page 2: Connecting The Cables

    Power adapter Getting Started To power on the HG655d, press the ON/OFF button on the side panel of the HG655d. After you power on the HG655d, the DSL indicator blinks (for less than three minutes), which indicates that the HG655d is being activated. Later, the DSL indicator turns solid on.
  • Page 3: Accessing The Internet

    If the configuration is wrong, you will not be able to access the Internet. Configuring the HSPA uplink When the HG655d is working through the Huawei HSPA data card, you need to install the Huawei HSPA data card on the HG655d. To create a HSPA uplink connection, do as follows.
  • Page 4: Configuring The Dsl Uplink

    Using the PPP Dial-Up Software on Your Computer Using the Embedded PPP Dial-Up Software on the HG655d If you select this method for accessing the network, the HG655d starts to set up a dial-up connection automatically after the startup. You can access the network after you power on your computer.
  • Page 5 Set the working mode of the HG655d to Bridge. For details, refer to the procedure for enabling the embedded dial-up function described in Step 2 in section "Using the Embedded PPP Dial-Up Software on the HG655d." Note that Bridge is selected from the Connection mode drop-down combo box.
  • Page 6: Configuring The Wireless Network Connection

    PC within two minutes, and then wait for a moment (typically 10s and at most 2mins). The WPS indicator of the HG655d becomes on from the blinking state, indicating that the HG655d is connected to your PC through the WLAN.
  • Page 7: Setting Up A Wireless Connection Manually

    Setting Up a Wireless Connection Manually If your network adapter does not support the WPS function, you can set up a wireless connection between your PC and the HG655d manually. To manually set up a wireless connection, use either of the following methods: Use the tool provided by your network adapter.
  • Page 8 TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, ARE MADE IN RELATION TO THE ACCURACY, RELIABILITY OR CONTENTS OF THIS MANUAL. TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, IN NO CASE SHALL HUAWEI TECHNOLOGIES CO., LTD BE LIABLE FOR ANY SPECIAL, INCIDENTAL, INDIRECT, OR CONSEQUENTIAL DAMAGES, OR LOST PROFITS, BUSINESS, REVENUE, DATA, GOODWILL OR ANTICIPATED SAVINGS.

Table of Contents