Node View (Multishelf Mode), Node View (Single-Shelf Mode), And Shelf View (Multishelf Mode) - Cisco ONS 15454 DWDM Reference Manual

Chapter 12 Cisco Transport Controller Operation
Table 12-4
Card Color
Yellow
Orange
Red
On the ONS 15454 ETSI, the colors of the FMEC cards reflect the real-time status of the physical FMEC
cards.
You cannot preprovision FMECs.
Note
Table 12-5
Upper Shelf FMEC Color
White
Yellow
Orange (Amber)
Red
The wording on a card in node view (single-shelf mode) or shelf view (multishelf mode) shows the status
of a card (Active, Standby, Loading, or Not Provisioned).
Table 12-6
Card Status
Act
Sty
Ldg
NP
Port color in card view, node view (single-shelf mode), and shelf view (multishelf mode) indicates the
port service state.
port service states, see
78-18343-02

12.5.2 Node View (Multishelf Mode), Node View (Single-Shelf Mode), and Shelf View (Multishelf Mode)

Multishelf View (Multishelf Mode), Node View (Single-Shelf Mode), and Shelf View
(Multishelf Mode) Card Colors (continued)
Status
Slot is provisioned; a Minor alarm condition exists.
Slot is provisioned; a Major alarm condition exists.
Slot is provisioned; a Critical alarm exists.
Table 12-5 lists the FMEC card colors. The FMEC ports shown in CTC do not change color.
Multishelf View (Multishelf Mode) and Node View (Single-Shelf Mode) FMEC Color
Status
Functioning card is installed.
Minor alarm condition exists.
Major alarm condition exists.
Critical alarm exists.
Node View (Single-Shelf Mode) or Shelf View (Multishelf Mode) Card Statuses
Description
Card is active.
Card is in standby mode.
Card is resetting.
Card is not present.
Table 12-7 lists the port colors and their service states. For more information about
Appendix B, "Administrative and Service States."
Table 12-6 lists the card statuses.
Cisco ONS 15454 DWDM Reference Manual, R8.5
12-11