Figure 3-1 Class 1 Laser Product Label; Table 3-1 Oscm, Osc-Csm, And Mmu Card Summary; Table 3-2 Software Release Compatibility For Optical Service Channel Cards - Cisco ONS 15454 DWDM Reference Manual

3.1.1 Card Summary
3.1.1 Card Summary
Table 3-1
Table 3-1
Card
OSCM
OSC-CSM
3.1.2 Card Compatibility
Table 3-2
Table 3-2 Software Release Compatibility for Optical Service Channel Cards
Card Name
OSCM
OSC-CSM
3.2 Class 1 Laser Safety Labels
This section explains the significance of the safety labels attached to the OSCM and OSC-CSM cards.
The faceplates of the cards are clearly labeled with warnings about the laser radiation levels. You must
understand all warning labels before working on these cards.
3.2.1 Class 1 Laser Product Label
The Class 1 Laser Product label is shown in
Figure 3-1
Class 1 lasers are products whose irradiance does not exceed the Maximum Permissible Exposure (MPE)
value. Therefore, for Class 1 laser products the output power is below the level at which it is believed
eye damage will occur. Exposure to the beam of a Class 1 laser will not result in eye injury and may
therefore be considered safe. However, some Class 1 laser products may contain laser systems of a higher
Cisco ONS 15454 DWDM Reference Manual, R8.5
3-2
lists and summarizes the functions of each card.
OSCM, OSC-CSM, and MMU Card Summary
Port Description
The OSCM has one set of optical ports and
one Ethernet port located on the faceplate. It
operates in Slots 8 and 10.
The OSC-CSM has three sets of optical
ports and one Ethernet port located on the
faceplate. It operates in Slots 1 to 6 and 12
to 17.
lists the CTC software compatibility for the OSC and OSCM cards.
R4.5 R4.6
Yes Yes
Yes Yes
Class 1 Laser Product Label
CLASS 1 LASER PRODUCT
Chapter 3
R4.7 R5.0 R6.0 R7.0
Yes Yes Yes Yes
Yes Yes Yes Yes
Figure 3-1.
Optical Service Channel Cards
For Additional Information
See the "3.3 OSCM Card"
section on page 3-4.
See the "3.4 OSC-CSM Card"
section on page 3-8.
R7.2 R8.0 R8.5
Yes Yes Yes
Yes Yes Yes
78-18343-02