Installing The Cisco Catalyst 9800-L Wireless Controller; Mounting The Controller; Mounting The Controller On Desktop Or Shelf - Cisco Catalyst C9800-L Hardware Installation Manual

Installing the Cisco Catalyst 9800-L Wireless
Controller
This chapter describes how to install the Cisco Catalyst 9800-L Wireless Controller.
Warning IMPORTANT SAFETY INSTRUCTIONS
This warning symbol means danger. You are in a situation that could cause bodily injury. Before you work
on any equipment, be aware of the hazards involved with electrical circuitry and be familiar with standard
practices for preventing accidents. Use the statement number provided at the end of each warning to locate
its translation in the translated safety warnings that accompanied this device. Statement 1071
SAVE THESE INSTRUCTIONS
•
•
•
•

Mounting the Controller

This section describes the various mounting options for the controller:

Mounting the Controller on Desktop or Shelf

Before mounting the controller on a desktop or shelf, install the rubber feet located in accessory kit shipped
with the controller.
To install the rubber feet to the controller, follow these steps:
Procedure
Step 1
Locate the rubber feet on the black adhesive strip that is shipped with the controller.
Mounting the Controller, on page 13
Connecting the Controller Console Port, on page 24
Management Ethernet Port Cable Connection, on page 24
Installing a Security Lock, on page 25
C H A P T E R
Cisco Catalyst 9800-L Wireless Controller Hardware Installation Guide
3
13