Switching On - Stihl RMA 410 C Instruction Manual

Switching On

A factory-new battery is not fully
charged.
It is advisable to charge the battery
completely before using it for the first
time.
Fitting the Battery
Open the battery compartment
2
1
Press in the tab (1) and swing the
N
cover (2) to the rear.
Fit the fuse key
The motor can be started only when the
fuse key is fitted.
3
4
Push the fuse key (3) into the
N
socket (4) as far as stop.
RMA 410 C
Fit the battery
5
Insert the battery (5) in the battery
N
compartment and push it home.
Close the battery compartment
2
1
Swing the cover (2) down – the
N
tab (1) must snap into position.
The battery compartment must always
be closed during operation.
Switching On
Do not start the motor in high grass or in
the lowest setting since this makes
starting more difficult.
2
1
Press in the switch lockout
N
button (1) with your right hand and
hold it there.
Pull the switch lever (2) against the
N
handlebar with your left hand and
hold it there – release the lockout
button.
English
15