Quick Programming - Philips VRZ360 Operator's Manual

VRZ360 4/7/99 9:53 PM

36 Quick Programming

Follow the steps below to program your VCR to record TV pro-
grams while you're away from home. The VCR will turn itself on,
record, and turn itself off automatically.
Before you begin make sure:
• Channels are programmed. Details are on pages 11 - 12.
• The clock is set. Details are on pages 13 - 17.
• There is a tape in the VCR. Make sure the tape's record tab is
intact and the tape is long enough to record the program(s).
• The VCR is in VCR position. The VCR light will appear on the
display panel when the VCR is in VCR position. If the VCR light
does not appear, press the VCR/TV button once.
• When you use a Cable Box/DBS, timer recordings are pro-
grammed differently. Read pages 8 - 9 before proceeding.
• Complete each step within 60 seconds of the previous step.
1
Press the VCR button, then press the TIMER button.
SELECT , 9 CHOOSE :/OK
A VCR PLUS+
QUICK PROGRAMMING
PROGRAM REVIEW
TO END PUSH EXIT
2
Press the PLAY 8 or STOP 9 button to select QUICK
PROGRAMMING, then press the FF :/OK button.
ONE TIME PROGRAM
PROGRAM 1
CHANNEL +/– – – –
START +/– – – : – – AM
STOP +/– – – : – – AM
REC SPEED SLP
DATE +/– – – /– – /– –
SET DAILY=8 OR WEEKLY=9
TO END PUSH EXIT
3
Press the CH(annel) 8/9 buttons to enter the channel
you want to record.
• If you are using a standard antenna or cable to VCR to TV
hookup (as shown on pages 6 - 7), enter the channel of the TV
program you want to record.
• If you are using a Cable Box/DBS, enter the Cable Box/DBS
output channel (03 or 04). Leave the Cable Box/DBS on for a
timer recording.
ONE TIME PROGRAM
PROGRAM 1
CHANNEL +/– 12
START +/– – – : – – AM
STOP +/– – – : – – AM
REC SPEED SLP
DATE +/– – – /– – /– –
SET DAILY=8 OR WEEKLY=9
TO END PUSH EXIT
Page 36
1
TV VCR
– +
POWER
CBL/DBS
STILL/SLOW cEJECT
MENU
PLAY
REW FF /OK
EXIT/STATUS
:
;; ::
L
STOP
TIMER [REC/OTR
S.SEARCH
1 2 3
+ +
CH
START STOP DATE
4 5 6
– –
DBS DAILY WEEKLY
7 8 9
VOL
0
SPEED CLEAR
QUICK PROGRAMMING
7;;INDEX ::7 AUDIO/MUTE
VCR/TV
2
3