Setting The Remote Control To Operate A Tv - Philips VRZ360 Operator's Manual

VRZ360 4/7/99 9:53 PM

26 Setting the Remote Control to Operate a TV

Your VCR remote control may operate your TV. Follow these
steps to set the remote control code.
1
Point the remote control at your TV. Press the TV but-
ton, then press the POWER button. If your TV turns on or
off, try the CH(annel) 8/9 buttons. If your remote control oper-
ates the TV, you're finished. If your TV doesn't turn on or off, or
if the CH(annel) 8/9 buttons don't work, go to step 2.
2
Find the brand of your TV on the list below, and remem-
ber the two-digit number beside it.
EMERSON . . . . . . . . . . . . .14
GOLDSTAR . . . . . . . . . . . .04
HITACHI . . . . . . . . . . . . . .12
JVC . . . . . . . . . . . . . . . . . .05
MAGNAVOX . . . . .01, 02, 03
MITSUBISHI . . . . . . . . . . . .13
PANASONIC . . . . . . . .07, 17
PHILIPS . . . . . . . . . . . . . . .01
PHILIPS MAGNAVOX . . . . . .
. . . . . . . . . . . . . . . .01, 02, 03
3
While you press and hold the TV button, use two
Number buttons to enter the two-digit code for your TV.
For example, if you have a Zenith TV, press Number buttons 1, 5.
Then, still holding the TV button, press the STOP 9 but-
4
Repeat step 1.
If the remote control works your TV, you're finished. If the
remote control still doesn't work your TV, repeat steps 2 - 3,
using a different code for your brand.
Page 26
TV CODES
RCA . . . . . . . . . . . . . . . . . .10
SAMSUNG . . . . . . . . . . . . .18
SANYO . . . . . . . . . . . . . . .11
SHARP . . . . . . . . . . . . . . . .16
SONY . . . . . . . . . . . . . . . .09
TOSHIBA . . . . . . . . . . . . . .08
ZENITH . . . . . . . . . . . .06, 15
2 Find the code for your TV.
1
TV
VCR
– +
POWER
CBL/DBS
cEJECT
STILL/SLOW
MENU
PLAY
REW FF /OK
EXIT/STATUS
:
;; ::
L
STOP
TIMER [REC/OTR
S.SEARCH
1 2 3
+ +
CH
START STOP DATE
4 5 6
– –
DBS DAILY WEEKLY
7 8 9
VOL
0
SPEED CLEAR
QUICK PROGRAMMING
7;;INDEX ::7 AUDIO/MUTE
VCR/TV
Helpful Hints
• If you had to program the remote
control to operate your TV, whenev-
er you replace the batteries in the
remote control, you will have to pro-
gram the remote control again.
• There is no guarantee that the
remote control will work your TV.
3