Tc-200 Mode & Cg-200 Overlay Input From A Laptop - Datavideo SE-2200 Instruction Manual

TC-200 Mode & CG-200 overlay input from a laptop
Use the SE-2200 menu option Inputs 5 and 6 mode to change input 6 from SDI input to HDMI.
Use the up arrow key to select HDMI. A tick will appear. Press ENTER to save this setting.
Within the menu option Inputs 5 and 6 mode there is a third option for HDMI colour mode.
This should be set to TC-200 Mode.
Now use the SE-2200 menu option DSK Settings and select DSK
Connect the laptop running the CG-200 Windows software to HDMI input 6 via HDMI.
Once the software is launched the switcher may not automatically show the extended Windows
desktop. This is normal.
Use the CG-200 HDMI On / Off button to toggle the CG overlay output On and Off.
Load your prepared CG-200 project and click the playback button on the same toolbar.
Pressing DSK PGM will take the DSK CG-200 overlay to air with a fade in transition.
A separate manual is also provided for help with preparing CG-200 projects.
25