Alcatel-Lucent 7450 ESS OS Quality Of Service Manual page 307

Hide thumbs Also See for 7450 ESS OS:
Table of Contents

Advertisement

All packets with a source MAC OUI value of 00-03-FA subject to a match condition should be specified
as: 0003FA000000 0x0FFFFF000000
Default
Values
etype
Syntax
etype etype-value
no etype
Context
config>qos>sap-ingress>mac-criteria>entry
Description
Configures an Ethernet type II value to be used as a service ingress QoS policy match criterion.
The Ethernet type field is a two-byte field used to identify the protocol carried by the Ethernet frame. For
e.g. 0800 is used to identify the IP v4 packets.
The Ethernet type field is used by the Ethernet version-II frames. IEEE 802.3 Ethernet frames do not use the
type field. For IEEE 802.3 frames use the dsap, ssap or snap-pid fields as match criteria.
The snap-pid field, etype field, ssap and dsap fields are mutually exclusive and cannot be part of the same
match criteria.
The no form of this command removes the previously entered etype field as the match criteria.
Default
None
Parameters
etype-value — The Ethernet type II frame Ethertype value to be used as a match criterion expressed in
hexadecimal.
Values
inner-tag
Syntax
inner-tag value [vid-mask]
no inner-tag
Context
config>qos>sap-ingress>mac-criteria>entry
Description
This command configures the matching of the second tag that is carried transparently through the service.
The inner-tag on ingress is the second tag on the frame if there are no service delimiting tags. Inner tag is
the second tag before any service delimiting tags on egress but is dependent in the ingress configuration and
may be set to 0 even in cases where additional tags are on the frame. This allows matching VLAN tags for
explicit filtering or QoS setting when using default or null encapsulations.
The inner-tag is not applicable in ingress on dot1Q SAPs. The inner-tag may be populated on egress
depending on the ingress SAP type.
On QinQ SAPs of null and default that do not strip tags inner-tag will contain the second tag (which is still
the second tag carried transparently through the service.) On ingress SAPs that strip any tags, inner-tag will
contain 0 even if there are more than 2 tags on the frame.
7450 ESS OS Quality of Service Guide
0xFFFFFFFFFFFF (hex) (exact match)
0x00000000000000 — 0xFFFFFFFFFFFF (hex)
0x0600 — 0xFFFF
Operational Commands
Page 307

Advertisement

Table of Contents
loading

Table of Contents