Table of Contents
Advertisement
Basic Configurations
Basic Configurations
•
•
•
•
•
•
•
•
Configuring an Ingress Queue Group Template
NOTE: To fully use the queue group feature to save queues, you must explicitly map all
forwarding classes to queue group queues. This rule is applicable to SAP ingress, SAP egress
and network QoS policies.
The following displays an ingress queue group template configuration example:
*A:Dut-T>cfg>qos>qgrps# info
----------------------------------------------
...
----------------------------------------------
*A:Dut-T>cfg>qos>qgrps#
Page 382
Configuring an Ingress Queue Group Template on page 382
Configuring an Egress Queue Group Template on page 383
Applying an Ingress Queue Group to a SAP Ingress Policy on page 384
Applying an Egress Queue Group to a SAP Egress Policy on page 385
Configuring a Queue Group on an Ethernet Access Ingress Port on page 386
Configuring a Queue Group on an Ethernet Access Egress Port on page 389
Configuring a Queue Group on an Network Egress Port on page 390
Configuring a Queue Group on a Router Interface on page 391
ingress
queue-group "QG_ingress_1" create
queue 1 best-effort create
mbs 100
exit
queue 2 best-effort create
mbs 100
exit
queue 3 best-effort create
mbs 100
exit
queue 4 best-effort create
mbs 100
exit
exit
exit
7450 ESS OS Quality of Service Guide
Advertisement
Table of Contents
