Maintenance; Replacement Parts; Troubleshooting Chart - Standard Horizon HX760S Operating Manual

Hide thumbs Also See for HX760S:
Table of Contents

Advertisement

transceiver.
1.
Slide the five AAA size Alkaline batteries into the FBA-38 with the Negative (・ side of the
batteries touching the spring connections inside the FBA-38.
2.
Insert the FBA-38 into the battery rest on the bottom of the transceiver, and then turn the
Battery Pack Lock to the "LOCK" position with a coin.
When the FBA-38 Alkaline Battery Case is used, the HX760S is not able to transmit using 6 W
power output.
10.1 GENERAL
The inherent quality of the solid-state components in STANDARD HORIZON radios will provide
many years of continuous use. Take the following precautions to prevent damage to the radio.
・ To prevent corrosion of electrical contacts and keep the water resistance, keep the microphone
connected or the jack covered at all times.
・ Never key the transmitter unless an antenna or suitable dummy load is connected to the antenna
receptacle.
・ Ensure that the input voltage does not exceed the value specified in your Owner's Manual.
・ Use only STANDARD HORIZON-approved accessories and replacement parts.

10.2 REPLACEMENT PARTS

Occasionally an owner needs a replacement part. These can be ordered from our Parts Department
by writing or calling:
Marine Division of Vertex Standard
US Headquarters
10900 Walker Street, Cypress, CA 90630, U.S.A.
Telephone (714) 827-7600
Commonly requested parts, and their part numbers are listed below.
・ CD-39 Charger Cradle: AAF94X001
・ CAT460 Antenna: Q3000176
・ Clip-19 Belt Clip: CP9196001
・ MIC/SP Cap: RA0577900
・ MIC/SP Cap O-Ring: RA046760A
・ MIC/SP Rubber: RA1030500

10.3 TROUBLESHOOTING CHART

NOTE

10. MAINTENANCE

26
FCC ID:K6630323X30
IC: 511B-30323X30
Vertex Standard Co.,Ltd.

Advertisement

Table of Contents
loading

Table of Contents