Programming A Recording (Without Video Plus+) - Philips VR620/07 Manual

TIMER
DATE REP. PROG. START PDC END
21 MO-FR 01 20:00
________________________________
REP.pSELECT STOREpOK
42
Programming a recording
(without VIDEO Plus+)
1
Switch on the TV set. If required, select the programme number for
the video recorder.
2
Press TIMER k on the remote control twice . A free TIMER block
will be highlighted.
3
Press TIMER k . The information will appear on the screen.
4
With TIMER k , P or Q you can select 'DATE' (date), 'PROG.'
VPS (programme number), 'START' (start time) and 'END' (end time).
Enter or change your information with ;qP or P r= , or with the
] 21:30
number buttons 0-9 on the remote control.
Selecting onetime/daily/weekly recordings
In 'DATE' use
'ONCE': Recording once
'MO-FR': Repeated daily recordings from Monday to Friday
'WEEK.': Repeated weekly recordings (every week on the same day)
Programme numbers of the 'E1' and 'E2' scart socket
You can also programme recordings from external sources via scart socket
EXT.1 AV. 1
'Switching on 'VPS/PDC' in the 'START' input field
Select the 'START' input field using
'VPS/PDC' (']' lights up). If you press
'VPS/PDC' off (']' goes out).
5
When all informations are correctly, confirm with
programming information is stored in a TIMER block.
SELECT
to select from the following options:
EXT.2 AV. 2
('E1') or ('E2').
TIMER k
SELECT
Programming a recording (TIMER)
SELECT
. Using switch on
again, you will switch
OK . The