Table of Contents
Advertisement
Quick Links
Download this manual
See also:
Owner's Manual
Advertisement
Table of Contents
Related Manuals for Philips VR422CAT
Summary of Contents for Philips VR422CAT
- Page 1 Video Cassette Recorder Hookup Pages VR422CAT VR622CAT...
-
Page 2: Hookups Without A Cable Box/Direct Broadcast System
Cable Box or a Direct Broadcast System, please see pages eight-nine. If you have a Stereo TV, please see page 10. After you hook up the VCR, go to page 11 to turn on the VCR. (The VR622CAT is illustrated here. The VR422CAT has single AUDIO IN/OUT jacks.) Disconnect the antenna or cable from your TV. - Page 3 Connect the supplied black RF coaxial cable to the OUT Jack on the back of the VCR and to the ANTENNA IN Jack on the TV. (You may use either a snap-on type (supplied) or screw-on type of coaxial cable, whichever you prefer.)
-
Page 4: Hookups With A Cable Box/Direct Broadcast System
You may not program channels at the VCR. You can only program a timer recording for one channel at a time. Set the TV and the VCR to the Cable Box/DBS output channel (channel 03 or 04). Set the CH3/CH4 switch on the back of the VCR to the same channel. Set your Cable Box/DBS to the channel you want to record. -
Page 5: Recording One Channel/Watching Another
Put the Cable Box/DBS on the same channel as the VCR’s CH3/CH4 switch. Set the TV to the Cable Box/DBS output channel (03 or 04). Then, with the VCR in VCR position (the VCR light will appear on the display panel), use the CH(annel) o/p buttons to select the channel you want to record at the VCR. -
Page 6: Hookups With A Stereo Tv
IN Jacks on your TV. If you have the VR422CAT, connect an audio cable to the white AUDIO OUT Jack on the back of the VCR. Then, connect the other end of the audio cable to the AUDIO IN Jack on your TV. If your TV has Right and Left AUDIO IN Jacks, you must use a “Y”... -
Page 7: Front Panel
VCR, or an audio source here. Details are on page 37. The VR622CAT is shown here. The VR422CAT has only one AUDIO In jack. VR622CAT VIDEO L AUDIO R VIDEO In Jack... -
Page 8: Rear Panel
(AV REAR) at the VCR. This allows you to view or hear the materials playing on the other equipment. The VR622CAT is shown here. The VR422CAT has only one AUDIO IN jack. AUDIO OUT Jack(s) Connect audio cables going to the AUDIO IN Jacks of a camcorder, another VCR, or an audio system here. -
Page 9: Helpful Hints
Audio and Video cables are not supplied. Make the connections shown above. VCR 1 will play your tape. Put a prerecorded tape in VCR 1. VCR 2 will record your tape. Insert a blank tape in VCR 2. The VCR must be in VCR position. (The VCR light will appear on the display panel.