Table of Contents
Advertisement
f
Confirm with the
button. Your programming details
OK
will then appear on the TV screen.
TIMER
VIDEOPLUS PROGRAMMING
DATE
PROG.
01
BBC1
________________________________
LP/SP
PRESS
SELECT
D You need to confirm the programme number the first
time you programme the video recorder with VIDEO
Plus+.
D If VIDEO Plus+ does not recognise the TV channel,
'PLEASE ENTER PROGRAMME NUMBER' will
appear on the TV screen. Instead of 'PLEASE
ENTER PROGRAMME NUMBER', you can select
the programme number you want with the number
buttons
and confirm with the
0-9
D If 'VIDEO PLUS CODE WRONG' appears on the
TV screen, this means you entered an incorrect
PlusCode number or the incorrect date. Correct your
instructions or end with the
D If 'WEEKEND PROGRAMMING - NOT
POSSIBLE' appears on the TV screen, the date
was incorrectly entered. 'Daily' programming can
only be used for recordings to be made from
Mondays to Fridays.
D Use the
button to switch 'VPS/PDC' on or off
SELECT
in 'START'.
D Use the
button to select the recording
SELECT
speed 'SP' or 'LP' in 'END'.
g
Confirm with the
button when the information is
OK
correct.
D The programming information has been stored in a
TIMER block.
h
To end, press the
TIMER k
i
Make sure that the cassette you have put in can be
recorded on.
j
Switch off with the
STANDBY m
The programmed recording will only function when the
video recorder is switched off with the
button.
D If any of the TIMER blocks are in use, '
on the video recorder display.
VPS
START PDC END
LP
20:00
21:30
TO STORE
PRESS
OK
button.
OK
button.
TIMER k
button.
button.
STANDBY m
' will light up
k
D While a programmed recording is being made, you
cannot operate your video recorder manually. If you
want to cancel the programmed recording, press the
button.
STANDBY m
D If the video recorder is switched on a few minutes
before a programmed recording is supposed to
begin, 'SWITCH TO STANDBY - TIMER
RECORDING' will flash on the TV screen.
D If you reach the end of the cassette during a
recording, the video recorder will automatically
eject the cassette.
D If you forget to load a cassette, 'NO CASSETTE'
will appear on the TV screen and '
video recorder display.
D If you have put in a cassette which cannot be used
for recording, the video recorder will automatically
eject it.
D If 'TIMER FULL' appears on the TV screen when
you press the
TIMER k
the available TIMER blocks. If you want to clear or
check a TIMER block, select it with the
button.
P =
D Programme number 'AUX' is provided for audio
recordings via sockets
' will flash on the
k
button, you have used up all
or
;P
.
AUX IN L R
21
Hide quick links:
Advertisement
Table of Contents
