Table of Contents
Advertisement
The Time Search function allows you to go to a specific point on a
tape. You will enter the exact amount of playback time that you
wish to skip in order to reach the specified point.
Make sure:
The VCR is on and is in VCR position. (The VCR/TV light will
appear. If it does not, press the VCR/TV button once.)
There is a tape in the VCR.
1
Press the TIME SEARCH button.
TIME SEARCH
- : - -
2
Within 30 seconds, press the PLAY button, the STOP
button, or the TIME SEARCH button repeatedly until
your desired length of time appears. (Example: 2:50 for 2
hours 50 minutes) You may also press and hold the PLAY button
or the STOP button until you reach the desired length of time.
TIME SEARCH
2 : 5 0
3
Within 30 seconds, press the REWIND button or the
F.FWD button. The VCR begins rewinding or fast forwarding to
the specified point. The time counts down on-screen beneath
TIME SEARCH as the searching progresses. When the tape finish-
es rewinding or fast forwarding, the VCR will start playback auto-
matically.
Time Search 39
POWER
VCR/TV
1
2
3
4
5
6
7
8
9
0
+100
SPEED
2
SEARCH
QUICK-
SLOW
TIME
FIND
MENU
DISPLAY
EXIT
RESET
3
REWIND
/ PLAY
RECORD
/ STOP
Helpful Hints
• You can set a Time Search for up
to 9 hours, 59 minutes (9:59).
• Time Search is not available during
recording.
• To exit Time Search mode, press
the COUNTER RESET/EXIT button.
• To cancel a Time Search already in
progress, press the STOP button.
• If the end of the tape is reached
during a Time Search, the VCR will
cancel the search and rewind the
tape. Details are on page 41.
EJECT
CHANNEL
1
INDEX
COUNTER
MEMORY
F.FWD
PAUSE/STILL
Advertisement
Table of Contents
