Time Search 35 - Magnavox MVR430MG Owner's Manual

mvr630mg.QX33 2/11/02
Follow the steps below to program the VCR to search forward or
backward on a tape a specific length of time. There must be a tape
in the VCR.
1
Press the TIME SEARCH button.
TIME SEARCH
0:00
ENTER SEARCH TIME
2
Within 10 seconds, use the Number buttons to
enter the desired length of time you want to skip
forward or backward. For example, for 1 hour, 25 min-
utes, press Number buttons 1, 2, 5. Or, for five minutes,
press Number buttons 0, 0, 5.
TIME SEARCH
0:05
PUSH FF OR REW
3
Within 10 seconds, press the F.FWD/B button or
the REW(ind)/{ button. The VCR will skip over the
specified length of time, then begin playback.
12:05 PM Page 35

Time Search 35

POWER VCR/TV EJECT
3
PLAY
REW
F.FWD
STOP
STATUS/EXIT
1 2 3
CH
4 5 6
7 8 9
0
SPEED TIME SEARCH STILL/PAUSE
REC/OTR MEMORY SLOW
1
Helpful Hints
• If you want to search for more than
59 minutes, you must enter the
length of time in hours and minutes.
For example, to search forward 70
minutes, press 1,1,0 at step 2.
• You can not do a Time Search
while recording.
• To remove the Time Search display,
press the TIME SEARCH button
again.
• To cancel a Time Search that is in
progress, press the STOP/p button.
2