Rerecording (Tape Duplication) 33; Playing - Magnavox VR400BMG Owner's Manual

1. Audio cable from AUDIO OUT Jack of
VCR 1 to AUDIO IN Jack of VCR 2
VCR 1
Playing VCR
ANT
AUDIO
IN
OUT
OUT
CH3 CH4
VIDEO
1
VCR 1 will play your tape. Insert a prerecorded tape in
VCR 1. If the tape does not have a record tab, playback begins. If
this happens, press the STOP/EJECT button on VCR 1 once.
2
VCR 2 will record your tape. Insert a blank tape in VCR 2.
Make sure the record tab is intact (details are on page five). Make
sure the VCR 2 power is on and VCR 2 is in VCR position. (The
VCR/TV light will appear. If it does not, press the VCR/TV button
once.)
3
Turn on the TV and set it to channel 3 or 4, whichever
channel the CH3/CH4 switch on VCR 2 is set to.
4
Point the remote control at VCR 2. Press the Number
buttons 0, 0. LineIn Rear (L1) will appear on the screen.
5
Point the remote control at VCR 2. Use the SPEED but-
ton to select SP or SLP.
6
Press the PLAY button on VCR 1 and the REC(ord)/OTR
button on VCR 2 at the same time.
7
To stop recording, press the STOP/EJECT button on VCR
2 once, then stop the tape on VCR 1.
IN
2. Video cable from VIDEO OUT Jack
of VCR 1 to VIDEO IN Jack of VCR 2

Rerecording (Tape Duplication) 33

VCR 2 - Recording VCR
• Unauthorized recording of copy-
• If a program has copyright protec-
• Audio and video cables are not sup-
• The illustration uses two VCRs just
• When LineIn Rear (L1) appears on
ANT
IN
AUDIO
OUT IN
OUT
CH3 CH4
VIDEO
3. RF coaxial
cable from the
OUT jack of
VCR2 to the TV's
ANTENNA IN
Jack
Helpful Hints
righted television programs, video
tapes, or other materials may
infringe on the rights of copyright
owners and violate copyright laws.
tion, it may not record clearly.
plied.
like yours. Different VCRs may oper-
ate differently.
the screen, the screen will be blue.