Iat Sensor Inspection - HYOSUNG Aquila GT250 Ej Service Manual

4-1-57 EI SYSTEM DIAGNOSIS
ET SENSOR INSPECTION
The engine temperature (ET) sensor
the front cylinder.
(Refer to page 55 [4-1-38])
ET SENSOR REMOVAL AND
INSTALLATION
Remove the ET sensor.
Install the ET sensor in the reverse order of
removal.
ET sensor : 5 ~ 8 N m (0.5 ~ 0.8 kgf m)

IAT SENSOR INSPECTION

The intake air temperature (IAT) sensor
installed at the downside of the air cleaner case.
(Refer to page 53 [4-1-36])
IAT SENSOR REMOVAL AND
INSTALLATION
Remove the fuel tank.
Remove the IAT sensor from the air cleaner case.
Install the IAT sensor in the reverse order of
removal.
RO SWITCH REMOVAL AND
INSTALLATION
The roll over (RO) switch
downside of the front seat striker.
Romove the front seat.
Remove the RO switch from the frame.
Install the RO switch in the reverse order of
removal.
is installed at
is
is located in the
74