If The Monitor Port Is A Digital Rgb Connector - Epson EMP-810 User Manual

If the monitor port is a digital RGB connector

If the computer has a standard DVI
video output port, use an optional digital video cable to connect the monitor
port of the computer to the Computer 1 port at the rear of the projector. The
type of connection cable used will vary depending on the specifications for the
computer's monitor port.
See "Appendix: Optional Accessories" (P.100)
To digital RGB
output port
Tip :
• You may need to change the computer settings when switching the computer output to
digital RGB. Refer to the Users Guide for the computer for details.
• If you are connecting a computer with a mini D-Sub 15-pin output port to the projector
at the same time, connect the computer with the mini D-Sub 15-pin output port to the
Computer 2/Component Video port of the projector.
• If more than one external component is connected to the projector, change the Comp1
Input setting in the Setting menu to Digital-RGB after making the connections.
(P.69)
Downloaded from ProjectorsManual.com Manuals
or DFP -compliant digital video card or
Digital video cable
(optional)
To Computer 1 port
21