thomann StairVille Pixel Beam 160 RGBW16x10W User Manual page 41

Display reversal
Brightness and running time of
the display
Software version
Select 'Display Rotate' from the main menu. By turning the jog wheel, you can now select
between 'Auto' (automatic rotation of the display for overhead installation), 'Normal' (normal
display) and 'Inverted' (the display is inverted for overhead installation).
Once the display shows the desired value, press the jog wheel button to confirm the setting
and close the menu.
Select 'Back Light' from the main menu. By turning the jog wheel, you can now select between
'On' (display permanently switched on), 'Off' (switches off the display if no key is pressed for
15 seconds) and 'Adjust' (adjust the display brightness). When adjusting the brightness, a
value of 1 is the lowest and a value of 10 is the maximum brightness level.
Once the display shows the desired value, press the jog wheel button to confirm the setting
and close the menu.
Select 'Version' from the main menu. The software version of the device will now appear on
the display.
To cancel the display of the software version, press the jog wheel or wait 20 seconds.
Pixel Beam 160 RGBW16x10W
Operating
41