thomann StairVille Pixel Beam 160 RGBW16x10W User Manual page 37

Operating mode 'DMX'
Auto show
Select 'Channel Mode' from the main menu. By turning the jog wheels you can now choose
between the following DMX operating modes: 9-channel, 16-channel or 72-channel. This set‐
ting is only relevant if the device is being controlled via DMX.
Once the display shows the desired value, press the jog wheel button to confirm the setting
and close the menu.
Select 'Show Mode' from the main menu. By turning the jog wheel you can now choose
between two different automatic shows. The selected show will start immediately.
Automatic mode is only relevant if the device is operating alone or is the master in a master/
slave configuration and is not controlled via DMX.
Once the display shows the desired value, press the jog wheel button to confirm the setting
and close the menu.
Pixel Beam 160 RGBW16x10W
Operating
37