Operating
Manual settings
38
Select 'Manual Control' from the main menu. By turning the jog wheel you can now choose
which option you wish to set:
'Pan' : Values between 0 and 127 rotate the head in a fixed position between 0° and 540°.
n
Values between 128 and 255 start continuous rotation. Values from 128 to 191 cause a
clockwise rotation whose speed decreases with increasing values, and values from 192 to
255 cause an anti-clockwise rotation whose speed increases with increasing values.
'Tilt' : Values between 0 and 127 tilt the head in a fixed position between 0° and 270°.
n
Values between 128 and 255 start continuous tilting. Values from 128 to 191 cause a clock‐
wise movement whose speed decreases with increasing values, and values from 192 to
255 cause an anti-clockwise movement whose speed increases with increasing values.
n
'Red' , 'Blue' , 'Green' , 'White' : Values between 0 and 255 control the intensity of the
respective colour LEDs, from switched off (0) to full brightness (255).
'Strobe' : Values between 1 and 255 cause a strobe effect with increasing speed. With a
n
value of 0 the strobe effect is switched off (continuous light).
Manual settings are only relevant if the device is operating alone or is the master in a master/
slave configuration and is not controlled via DMX.
moving head