thomann StairVille Pixel Beam 160 RGBW16x10W User Manual page 27

DMX indicator
Connections in master/slave
mode
When the device and the DMX controller are operational, the DMX indicator in the display
shows that a DMX signal is being received on the input.
When you configure a group of devices in master/slave mode, the first unit will control the
other units for an automatic, sound-activated, synchronized show. This function is ideal when
you want to start a show immediately. Connect the DMX output of the master device to the
DMX input of the first slave device. Then connect the DMX output of the first slave device to
the DMX input of the second slave device and so on.
Pixel Beam 160 RGBW16x10W
Starting up
27