Trimming; Cleaning - Philips Norelco AT850 User Manual

ENGLISH
16
C
Put the Protective Cap on the shaver to
5
protect shaving heads.
Replace your Philips Norelco shaving heads
(model #HQ8 or SH50) once a year for optimal
shaving results.

Trimming

To groom sideburns and moustache:
1 Turn shaver ON.
C
2 Push down spring-release trimmer switch.
The trimmer can be activated while the shaver is
running.
C
3 Hold trimmer as shown and move in
downward strokes with gentle pressure.
C
4 Close trimmer by pressing trimmer down.
5 Turn shaver OFF.

Cleaning

C
Q This symbol indicates that the shaver can be
used in the bath or shower.
Q Always clean your shaver after each use.
Q Always switch shaver OFF, unplug and remove
power cord before cleaning.
Q Never clean, remove or replace head
assembly while motor is on.
Q Do not apply pressure to combs. Do not
touch shaving heads with hard objects as this
may dent or damage precision-made slotted
combs.
Q Do not use shaver if combs are damaged or
broken. Facial injury may occur.
Q Do not use compressed air, abrasives,
scourers or liquids such as acetone to clean
the shaver.
Cleaning the Shaving Unit
The shaving heads may be quickly cleaned after
each use by rinsing with hot water: Water from
the tap should be on a hot setting, BUT BE
CAREFUL TO TEST WATER FIRST SO AS NOT
TO BURN OR SCALD HANDS.
Q Regular cleaning guarantees better shaving
results.
Q Do not immerse shaver in water.
Q While rinsing shaving heads, water may drip
out of the base of shaver. This is a normal
occurrence.
ENGLISH
17