Philips Norelco AT850 User Manual page 10

ENGLISH
18
1 Always turn shaver OFF, unplug from
outlet and remove power cord from
shaver.
C
2 Press the Shaver Head Release Button to
open the Shaver Head Assembly.
C
3 Clean inside shaving heads and hair
chamber by running under hot water.
C
4 Clean outside of Shaver Head Assembly by
running under hot water.
5 Close the Shaver Head Assembly and
shake off excess water.
Be careful not to hit the shaving unit against
anything while shaking off excess water.
6 Open Shaver Head Assembly again and
leave open to air dry.
NOTE: Do not wipe or dry the shaving heads
with a towel or tissue. This could damage the
shaving heads.
Q If the shaving unit becomes detached from the
shaver, you can easily reattach it.
Q You may also clean the hair chamber without
water by using the supplied brush.
Extra-thorough Cleaning Method
Do not mix up the cutters and combs as the
shaving performance may be adversely affected
for several weeks before optimal shaving
performance is restored.
1 Turn shaver OFF, remove the charging plug
from the outlet and power cord from the
shaver.
C
2 Press the Shaver Head Release Button to
open the Shaver Head Assembly.
C
3 Pull the shaving unit off the shaver.
C
4 Turn the lock counterclockwise to unlock
B
(A) and remove the retaining frame (B).
A
ENGLISH
19