Echo SHC-2620 Operator's Manual page 34

MAINTENANCE
1. Brush loose debris from blade
and coat both sides of blade
with the 50-50 cleaning mixture.
2. Allow cleaning mixture to soften
the remaining gummy residue
then wipe it from the blade.
3. Apply clean oil to the entire
length of the blade. Be certain
the blade bolts are lubricated.
4. Wipe excess oil from the blade
before putting the unit back in
service.
Gear Case
Level 1.
Parts Required:
1. Clean dirt from the grease fitting (A).
2. Carefully pump grease into
fitting (A). DO NOT force
grease. Too much pressure will
force grease past seals and
cause damage. Apply 1 - 2
pumps of grease every 15 - 25
hours of operation.
3. Wipe excess grease from
around grease fitting.
Drive Shaft Assembly
Level 1.
Parts Required:
Hedge Trimmer blades are very sharp. Touching them may lead
to severe personal injury. Avoid touching blades whenever
possible, and always wear gloves to protect hands.
34
A grease gun with lithium based grease.
Lithium based grease.
SHC-2620
A
A
A
X7502342001
© 6/2017 ECHO Inc.