Stopping Engine - Echo SHC-2620 Operator's Manual

SHC-2620
2. Purge Bulb
Pump purge bulb (C) until
fuel is visible and flows freely
in the clear fuel tank return
line. Pump bulb an
additional four or five times.
3. Recoil Starter
Lay the unit on a flat area
and keep movable
attachment parts clear of all
obstacles. Firmly grip
throttle handle and throttle
trigger lockout with left hand.
Rapidly pull recoil starter
handle (D) until engine
starts.
Note: If engine does not start after five pulls, use Cold Start
Procedure.

Stopping Engine

1. Throttle
Release throttle and allow
engine to return to idle
before shutting off engine.
2. Stop Switch
Move stop switch (A) to
STOP position.
X7502342001
© 6/2017 ECHO Inc.
OPERATION
C
B
A
D
23