Operation - Echo SHC-2620 Operator's Manual

SHC-2620
2. Remove vinyl cap from drive
shaft if necessary.
3. Align locating hole in gear
housing with locating hole in
drive shaft.
4. Slide gear housing assembly
onto drive shaft. Be certain the
flex drive shaft engages the
hole in the driver gear.
5. Install locating bolt (A). Tighten
clamping bolt (B).

OPERATION

Moving parts can amputate fingers or cause severe injuries.
Keep hands, clothing and loose objects away from all openings.
Always stop engine, disconnect spark plug, and make sure all
moving parts have come to a complete stop before removing
obstructions, clearing debris, or servicing unit.
Engine exhaust IS HOT, and contains Carbon Monoxide (CO), a
poison gas. Breathing CO can cause unconsciousness, serious
injury, or death. Exhaust can cause serious burns. ALWAYS po-
sition unit so that exhaust is directed away from your face and
body.
X7502342001
© 6/2017 ECHO Inc.
OPERATION
A
B
17