Panasonic FP3 Technical Manual page 23

J 16 - input type (AFP87522) and 16 - output type (AFP87524)
Operation monitor LEDs
1
Power supply
5
terminal
(24 V DC)
Operation monitor LEDs:
1
Station number selector (STATION NO.):
2
Operation mode selector (MODE SW.):
3
Input or output indicators (LED):
4
Power supply terminal (24 V DC):
5
Input or output terminal:
6
RS485 interface:
7
Expansion connector:
8
Station number selector
2
(STATION NO.)
Input or output terminal
6
DIN rail attachment levers
Indicate the operation and communication status of the
MEWNET-TR system. See following page.
Set the slave station number of the MEWNET-TR system with
a screwdriver. See page 57, "4-2. I/O Allocation," for details
about the station number setting.
Selects the MEWNET-TR communication conditions. See following
page.
Input type:
Output type: Indicates the output ON/OFF states.
<Example: 8 - input/output type>
+
24V
Supplies 24 V DC.
Input type:
Output type: Connects to output field devices (e.g., LEDs).
Interface for MEWNET-TR communications using
2-conductor cable and twisted pair cable.
Connects to expansion FP I/O terminal unit using expansion
cable.
Operation mode
3
selector (MODE SW.)
RS485 interface
7
Indicates the input ON/OFF states.
0 1 2 3 4 5 6
Connects to input field devices (e.g., limit
switches).
2-3. Slave Stations
Expansion
8
connector
Input or output
4
indicators
(LED)
LEDs
7 +
RS485
17