Attaching The Rack-Mount Brackets - Cisco Catalyst 2350 Installation Manual

Installing the Switch

Attaching the Rack-Mount Brackets

You must first remove the screws from the switch chassis so that the mounting brackets can be attached.
For a front-mounting position, remove two Phillips truss-head screws from the switch side panels
(Figure
screws.
Figure 2-2
Catalyst 2350 Switch Hardware Installation Guide
2-8
2-2). For a mid-mounting position, remove one screw. For a rear-mounting position, remove two
Removing Screws from the Switch
47X
48X
Chapter 2 Switch Installation
OL18479-01