Attaching The Rack-Mount Brackets - Cisco C9200L-24T-4X-A Hardware Installation Manual

Installing the Switch
1
2

Attaching the Rack-Mount Brackets

Before you begin
You can use the minimum recommended number of two screws for installing the rack-mount bracket to each
side of the switch. If required, while mounting, you can use the additional four screws provided in the accessory
kit.
Procedure
Use two Phillips flat-head screws to attach the long side of the bracket to each side of the switch for the front-
or rear-mounting positions.
The following illustration shows a C9200L switch. C9200 switches follow the same method for installing the
rack mount bracket.
19-inch brackets 3
(ACC-KIT-T1=)
ETSI brackets 4
(RACK-KIT-T1=)
Cisco Catalyst 9200 Series Switches Hardware Installation Guide
Attaching the Rack-Mount Brackets
23-inch brackets
(RACK-KIT-T1=)
24-inch brackets
(RACK-KIT-T1=)
25