Gear Oil; Manual Transaxle Oil / Auto Gear Shift Oil; Gear Oil Level Check; Gear Oil Change - Suzuki Swift 2015 Owner's Manual

Table of Contents

Advertisement

Engine Coolant: 1, 2
INSPECTION AND MAINTENANCE
NOTE:
If your engine is equipped with the high
tension cord type ignition wiring and you
experience some firing problem of spark
plugs, such as, hard engine-starting, mis-
fire etc., the cause may be located not only
on spark plugs but also on deteriorated
ignition wirings (generally, used for more
than 80,000 km or five years). If spark plug
replacement does not solve the problem,
have the ignition wiring and other ignition
system
inspected
by
your
SUZUKI dealer.

Gear Oil

Manual Transaxle Oil / Auto Gear
Shift Oil
When adding gear oil, use gear oil with the
appropriate viscosity and grade.
We highly recommend you use:
"MARUTI SUZUKI GEAR OIL 75W-80" for
manual transaxle gear oil or Auto Gear
Shift Oil.
7-13

Gear Oil Level Check

Manual transmission
60D204
(2)
(1) Oil filler and level plug
(for Petrol engine model)
(2) Oil filler and level plug
(for diesel engine model)
To check the gear oil level, use the fol-
lowing procedure:
1) Park the vehicle on a level surface with
the parking brake applied. Then, stop
MARUTI
the engine.
2) Remove the oil filler plug (1) or (2) .
3) Check the inside of the hole with your
finger. If the oil level comes up to the
bottom of the plug hole, the oil level is
correct. If so, reinstall the plug.
4) If the oil level is low, add gear oil
through the oil filler plug hole (1) or (2)
until the oil level reaches the bottom of
the filler hole, then reinstall the plug.
Tightening torque for oil filler plug
(1) or (2)
21 Nm (2.1 kg-m, 15.2 lb-ft)
CAUTION
After driving the vehicle, the trans-
EXAMPLE
mission oil temperature may be high
(1)
enough to burn you. Wait until the oil
filler plug is cool enough to touch
with your bare hands before inspect-
ing transmission oil level.
NOTICE
74LHT0714
When tightening the plug, apply the
following
sealing
equivalent to the plug threads to pre-
vent oil leakage.
SUZUKI Bond No. "1216E" or "1217G"

Gear Oil Change

Since special procedures, materials and
tools are required, it is recommended that
you trust this job to your MARUTI SUZUKI
authorized dealer.
compound
or
74LH0-74E

Advertisement

Table of Contents
loading

Table of Contents