Seat Belt Hanger; Seat Belt Inspection; Child Restraint Systems - Suzuki Swift 2015 Owner's Manual

BEFORE DRIVING
Seat Belt Hanger (if equipped)
EXAMPLE
74LHT0212
NOTICE
When you move a seatback, make
sure the belt webbing is hooked in
the seat belt hangers so the seat belts
are not caught by the seatback, seat
hinge, or seat latch. This helps pre-
vent damage to the belt system.
2-33

Seat Belt Inspection

EXAMPLE
65D209S
Periodically inspect the seat belts to make
sure they work properly and are not dam-
aged. Check the webbing, buckles, latch
plates, retractors, anchorages, and guide
loops. Replace any seat belts which do not
work properly or are damaged.
WARNING
Be sure to inspect all seat belt
assemblies after any collision. Any
seat belt assembly which was in use
during a collision (other than a very
minor one) should be replaced, even
if damage to the assembly is not
obvious. Any seat belt assembly
which was not in use during a colli-
sion should be replaced if it does not
function properly, it is damaged in
any way or the seat belt pretension-
ers were activated (that is, if the front
air bags were activated).

Child Restraint Systems

60G332S
Infant restraint - rear seat only
74LH0-74E
80JC007