Philips AVENT Avent DECT baby monitor SCD498 User Manual page 14

EngliSh
1
Question
Some buttons do not
seem to work when I
press them. What do I do
wrong?
The operating time of the
parent unit is supposed to
be at least 24 hours. Why
is the operating time of my
parent unit shorter?
Why doesn't battery
check light on the parent
unit light up when I startto
recharge the parent unit.
Answer
You have to press all buttons (except the on/off buttons and the
TALK button) briefly. If you press them too long, they do not work.
When the parent unit batteries have been charged for the first time,
the operating time is less than 24 hours. The batteries only
reach their full capacity after you have charged and discharged
them at least four times.
The volume of the parent unit may be set too high, which causes
the parent unit to consume a lot of energy. Decrease the volume of
the parent unit
The microphone sensitivity level of the baby unit may be set too
high, which causes the parent unit to consume a lot of energy.
Decrease the microphone sensitivity level with the SENSITIVITY
button on the parent unit.
It may take a few minutes before the battery check light lights up
when you charge the parent unit for the first time or after a long
period of disuse.