Mounting The 2Bridb Pcb; Figure 2-64 Plastic Knockouts On 084M-B1/080E-B1/008E-B1/000E-B1; Figure 2-65 Installing The 2Bridb-C1 - NEC SL1100 Hardware Manual

SL1100

3.3.3 Mounting the 2BRIDB PCB

Set the switches on the 2BRIDB-C1 PCB before mounting onto the 084M-
B1/080E-B1/008E-B1/000E-B1 PCB, refer to the
page 2-49.
1. Cut and remove specified Plastic Knockouts on the 084M-B1/080E-B1/008E-B1/000E-B1 PCB.
Plastic
Knockout
Plastic
Knockout

Figure 2-64 Plastic Knockouts on 084M-B1/080E-B1/008E-B1/000E-B1

2. Insert two Nylon-spacers into the specified holes. Using supplied screw, fasten Metal Spacer to
2BRIDB-C1 PCB.
3. Mount the 2BRIDB-C1 PCB onto the 084M-B1/080E-B1/008E-B1/000E-B1 PCB using two Nylon-
spacers and one screw. (Refer to
2-42
084M-B1
080E-B1/008E-B1
Figure 2-65 Installing the 2BRIDB-C1 on page
Switch Setting on
Plastic
Knockouts
ISSUE 4.1 (R5.1)
000E-B1
2-43)
Installation