Mounting The Expansion Interface Card; Mounting The 080E-B1/008E-B1/000E-B1/1Priu-C1 Pcbs; Figure 2-53 Removing The Sub-Cover - NEC SL1100 Hardware Manual

SL1100
Items
IP4WW-000E-B1
IP4WW-2BRIDB-C1
IP4WW-1PRIU-C1

3.3 Mounting the Expansion Interface Card

DO NOT POWER ON until all installation has been completed.
Fit the optional 4COIDB-B1/2BRIDB-C1 daughter boards before installing the 084M-B1/080E-B1/008E-
B1/000E-B1 PCBs.
Set the switches on the 2BRIDB-C1 board before mounting it onto the 084M-B1/080E-B1/008E-B1/000E-
B1 PCB.

3.3.1 Mounting the 080E-B1/008E-B1/000E-B1/1PRIU-C1 PCBs

The procedure for mounting the expansion interface cards is as follows;
• Do Not Power on until all installation have been completed.
1. Turn off the system power and disconnect the AC cord from KSU.
2. Open and remove the Sub-Cover.
2-36
List of Contents
000E-B1 PCB (with PKG Spacer)
Nylon Spacers
Metal Spacers
Screws (with circular washer)
2BRIDB-C1 PCB
Nylon Spacers
2BRI Label
Metal Spacers
Screws (with circular washer)
1PRIU-C1 PCB (with PKG Spacer)
Nylon Spacers
Metal Spacers
Screws (with circular washer)
Sub-Cover

Figure 2-53 Removing the Sub-Cover

ISSUE 4.1 (R5.1)
QTY
1
2
2
2
1
2
1
1
2
1
2
2
2
Sub-Cover
Tab
Note
Tab
Installation